Victron 22 kW EVC300400300

Výkon: 22 kW
Fázy: 3‑fázový
Dostupnosť: Na sklade
: Počet ponúk: 17
Minimálna objednávka: 1 ks

Na stiahnutie

PDF Katalógový list — evc300400300 0,2 MB

Cena bez DPH podľa množstva

od 365,36 €

Ceny v množstevných stupňoch sú viditeľné pre registrované firmy.

Teraz nič neplatíte. Náklady na dopravu oceníme po podaní objednávky; vyžadujú Váš súhlas.

Popis

Nabíjačka AC Victron EVC300400300 s výkonom 22 kW, trojfázová, zásuvka, konektor Typ 2. Krytie IP44, prevádzková teplota od −25 do 50 °C, menovitý prúd 32 A. Komunikácia: Modbus TCP over WiFi, Bluetooth. Rozmery 377 × 148 × 148 mm (v × š × h), hmotnosť 3 kg.

Informácie od výrobcu

High power EV Charging Station The EV Charging Station has three-phase and single-phase capabilities. It delivers a maximum of 22 kW AC in three-phase or 7.3 kW in single-phase mode. WiFi Communication WiFi: 802.11 b/g/n for configuration, monitoring and control. The internal WiFi module can be configured in Access Point or Station mode for both the initial setup and monitoring. Easy operation and control via Bluetooth and the VictronConnect App Get full control and overview of all operating parameters and session statistics at a glance. LCD Touch Screen Built-in 4.3-inch LCD Touch Screen for monitoring and control. Light Ring for fast viewing the device state Fully programmable RGB Light Ring around charging port, to quickly determine the device state. It can be programmed from the integrated web interface to display different light effects based on the current state (disconnected, charging, charged etc.). Three working modes available: 1. Manual Mode to configure output current Manual mode allows configurable output current between 6-32 A. The charging power is controlled in two ways: by using the slider on the LCD touch screen or by using its web page. It allows to manually start or stop the charging process when a vehicle is connected to the charging station. 2. Automatic Mode to ensure maximum PV system efficiency Detects when excess power is available and uses only that power to charge the vehicle. 3. Scheduled Mode to charge the EV at certain time intervals A fully programmable scheduler allows charging at different time intervals, for example at certain times during the night when grid energy is cheaper. Integration with GX devices and VRM Control and monitor the EV Charging Station from a GX device touch display and the Remote Console and the VRM Portal. The VRM Portal also offers real time and custom reports for configurable time periods.

Technické údaje

Rozmery a hmotnosť

Hĺbka	148 mm
Výška	377 mm
Šírka	148 mm
Dĺžka	307 mm
Hmotnosť	3 kg

Podrobnosti o produkte

Rad	EV Charging Station – 22 kW
Rozsah nabíjacieho napätia	170-265 V
Krytie IP	IP44
Menovitý prúd (nastaviteľný)	32 A
Rozsah prevádzkových teplôt	-25-50 °C
Komunikácia	Modbus TCP over WiFi, Bluetooth